← Back to the LaserJet Managed MFP E82670 pageDownload PDF
Document Services Australia
Spec sheet · page 1 of 2
13 September 2026
New HP · A3 black and white multifunction

HPLaserJet Managed MFP E82670

Supplied, installed and serviced by Document Services Australia, with toner included under the service agreement and one number for service, toner and meter readings.

70pages a minute, A4
A3black and white multifunction
10.1 incolour touch screen

Specifications

SpeedUp to 70 pages a minute A4; 35 copies a minute A3
First copyAs fast as 5.3 seconds from ready
Paper sizesTray 1 takes A3, A4, A4R, A5, A5R, A6, RA3, SRA3, RA4, SRA4, B4, B5 and B6, and custom sizes 98 x 139.7 mm to 320 x 457.2 mm. Tray 2 custom sizes 98 x 139.7 mm to 241.5 x 297 mm. Tray 3 custom sizes 140 x 182 mm to 320 x 457.2 mm
Paper capacityA 100 sheet multi purpose tray and two 520 sheet trays as standard
Two sided printingAutomatic, 60 to 300 gsm
Output500 sheets face down
Document feeder200 sheet automatic document feeder
ScanningUp to 90 pages a minute single sided and 180 images a minute two sided, in black and white and in colour, at up to 600 x 600 dpi optical resolution
Touch screen10.1 inch WXGA colour touch screen

Continued on page 2

1300 922 260documentservices.com.auinfo@documentservices.com.auABN 95 420 878 438

Specifications from HP's product specifications page for the LaserJet Managed MFP E826dn on hp.com, the current E826 generation, a series page whose columns cover the 50, 60 and 70 pages a minute configurations; the 70 pages a minute column was used. The speed for this model was confirmed against HP's LaserJet Managed MFP E826 Series user guide on hp.com, which states 70 pages a minute for the E82670, checked 13 September 2026. Specifications change with each release and some items are options; we confirm the current model, its speed and its options with your quote. Important information is on page 2. This sheet is prepared by Document Services Australia and is not a HP publication.

Scan for a priceOpens this model on our website
Document Services Australia
Spec sheet · page 2 of 2
13 September 2026

HPLaserJet Managed MFP E82670

Specifications, continued

Memory and storage6 GB memory; 500 GB hard disk as standard
ConnectionsGigabit Ethernet 10/100/1000T, Hi Speed USB 2.0 host, SuperSpeed USB 3.0 device, SuperSpeed USB 3.0 host, and a second generation Hardware Integration Pocket
Power1,090 watts printing, 36 watts ready, 0.9 watts sleep, 0.2 watts off
Size585 x 694.7 x 907.7 mm (width x depth x height)
Weight78.2 kg, excluding the toner cartridge

Before you choose, six questions

  1. How many pages a month, roughly?The single figure that sizes the machine. Too small and it wears out; too big and you pay for speed you never use.
  2. How much of it is colour?Colour pages cost more to run than black. If most of your printing is mono, the machine and the agreement should reflect that.
  3. Do you need A3?Plans, posters and some forms need it. Most offices do not, and an A4 machine is smaller and cheaper to run.
  4. How much scanning, and to where?Email, shared folders and cloud storage are all set up differently. Tell us where scans should land and we configure it on the day.
  5. Stapling, folding, booklets?Finishing is an option on most models, added at the quote. It is far cheaper to specify now than to add later.
  6. How many people share it?Decides trays, paper capacity and whether one machine is enough. We would rather tell you two smaller ones than sell you one big one.

What happens after you say yes

Delivery and setup

  • Delivered and installed by trained technicians, not dropped at the door
  • Placed, levelled and connected on site
  • Drivers installed on your computers
  • Scanning to email and folders tested with you
  • Your old machine taken away when you ask

Every month after

  • Toner supplied under the agreement, delivered before you run out
  • Meter readings collected for you, so billing is on actual pages
  • One number for service, toner and readings
  • A machine number on the DSA sticker that the customer portal recognises
  • Parts and labour covered under the agreement