← Back to the ECOSYS M8130cidn pageDownload PDF
Document Services Australia
Spec sheet · page 1 of 2
11 September 2026
New Kyocera · A3 colour multifunction

KyoceraECOSYS M8130cidn

Supplied, installed and serviced by Document Services Australia, with toner included under the service agreement and one number for service, toner and meter readings.

30pages a minute, A4
A3colour and black and white
7 intouch screen

Specifications

SpeedUp to 30 pages a minute A4 and 15 pages a minute A3, colour and black and white; 26 pages a minute two sided
First copyAbout 7.4 seconds or less black and white, 9.3 seconds or less colour (from the feeder)
Warm upAbout 30 seconds or less
Print resolution1,200 x 1,200 dpi
Paper sizesA5 to A3 from the drawer; A6 to A3 from the bypass
Paper weights60 to 256 gsm
Paper capacityOne 500 sheet drawer and a 100 sheet bypass as standard; up to 1,600 sheets with options
Two sided printingStandard, 60 to 220 gsm
Output250 sheets face down plus a 30 sheet job separator tray

Continued on page 2

1300 922 260documentservices.com.auinfo@documentservices.com.auABN 95 420 878 438

Specifications from Kyocera's Australian datasheet for the ECOSYS M8130cidn (kyoceradocumentsolutions.com.au), checked 11 September 2026. Specifications change with each release and some items are options; we confirm the current model, its speed and its options with your quote. Important information is on page 2. This sheet is prepared by Document Services Australia and is not a Kyocera publication.

Scan for a priceOpens this model on our website
Document Services Australia
Spec sheet · page 2 of 2
11 September 2026

KyoceraECOSYS M8130cidn

Specifications, continued

Document feeder50 sheet reversing feeder as standard
ScanningUp to 50 images a minute (300 dpi, A4), colour and black and white; up to 600 x 600 dpi
Touch screen7 in colour touch screen
Memory and storage1.5 GB memory, up to 3 GB; 32 GB or 128 GB storage optional
ConnectionsGigabit Ethernet, USB 2.0 and two USB host ports; wireless networking optional
Power220 V, 50 Hz; 580 W printing, 80 W ready, 0.5 W sleep
Size590 x 590 x 753 mm (width x depth x height)
WeightAbout 79 kg

Before you choose, six questions

  1. How many pages a month, roughly?The single figure that sizes the machine. Too small and it wears out; too big and you pay for speed you never use.
  2. How much of it is colour?Colour pages cost more to run than black. If most of your printing is mono, the machine and the agreement should reflect that.
  3. Do you need A3?Plans, posters and some forms need it. Most offices do not, and an A4 machine is smaller and cheaper to run.
  4. How much scanning, and to where?Email, shared folders and cloud storage are all set up differently. Tell us where scans should land and we configure it on the day.
  5. Stapling, folding, booklets?Finishing is an option on most models, added at the quote. It is far cheaper to specify now than to add later.
  6. How many people share it?Decides trays, paper capacity and whether one machine is enough. We would rather tell you two smaller ones than sell you one big one.

What happens after you say yes

Delivery and setup

  • Delivered and installed by trained technicians, not dropped at the door
  • Placed, levelled and connected on site
  • Drivers installed on your computers
  • Scanning to email and folders tested with you
  • Your old machine taken away when you ask

Every month after

  • Toner supplied under the agreement, delivered before you run out
  • Meter readings collected for you, so billing is on actual pages
  • One number for service, toner and readings
  • A machine number on the DSA sticker that the customer portal recognises
  • Parts and labour covered under the agreement