← Back to the TASKalfa MZ2202 pageDownload PDF
Document Services Australia
Spec sheet · page 1 of 2
13 September 2026
New Kyocera · A3 black and white multifunction

KyoceraTASKalfa MZ2202

Supplied, installed and serviced by Document Services Australia, with toner included under the service agreement and one number for service, toner and meter readings.

22pages a minute, A4
A3black and white
4.3 incolour touch screen

Specifications

SpeedUp to 22 pages a minute A4 and 10 pages a minute A3, black and white
First copyAbout 5.9 seconds or less to first print
Warm upAbout 29 seconds or less
Print resolution600 x 600 dpi printing, copying and scanning, with a fast 1200 mode at 1,800 x 600 dpi
Paper sizesMulti purpose tray: A3, A4, A5, A6, Ledger, Letter, Legal
Paper weightsMulti purpose tray 45 to 160 gsm; optional paper feeder 64 to 105 gsm
Paper capacity100 sheet multi purpose tray as standard; up to 1,300 sheets A4 with optional 300 sheet paper feeders
Two sided printingOptional duplex unit, A3 to A5R, 64 to 105 gsm
OutputUp to 250 sheets face down

Continued on page 2

1300 922 260documentservices.com.auinfo@documentservices.com.auABN 95 420 878 438

Specifications from Kyocera's Australian product page for the TASKalfa MZ2202 (kyoceradocumentsolutions.com.au), checked 13 September 2026. Specifications change with each release and some items are options; we confirm the current model, its speed and its options with your quote. Important information is on page 2. This sheet is prepared by Document Services Australia and is not a Kyocera publication.

Scan for a priceOpens this model on our website
Document Services Australia
Spec sheet · page 2 of 2
13 September 2026

KyoceraTASKalfa MZ2202

Specifications, continued

Document feederOptional 50 sheet reversing document processor
ScanningUp to 25 images a minute at 600 dpi A4. 600, 400, 300 and 200 dpi. Colour scanning is standard
Touch screen4.3 inch colour touch screen
PowerPrinting 442 W; ready mode 79 W; sleep mode 0.3 W

Before you choose, six questions

  1. How many pages a month, roughly?The single figure that sizes the machine. Too small and it wears out; too big and you pay for speed you never use.
  2. How much of it is colour?Colour pages cost more to run than black. If most of your printing is mono, the machine and the agreement should reflect that.
  3. Do you need A3?Plans, posters and some forms need it. Most offices do not, and an A4 machine is smaller and cheaper to run.
  4. How much scanning, and to where?Email, shared folders and cloud storage are all set up differently. Tell us where scans should land and we configure it on the day.
  5. Stapling, folding, booklets?Finishing is an option on most models, added at the quote. It is far cheaper to specify now than to add later.
  6. How many people share it?Decides trays, paper capacity and whether one machine is enough. We would rather tell you two smaller ones than sell you one big one.

What happens after you say yes

Delivery and setup

  • Delivered and installed by trained technicians, not dropped at the door
  • Placed, levelled and connected on site
  • Drivers installed on your computers
  • Scanning to email and folders tested with you
  • Your old machine taken away when you ask

Every month after

  • Toner supplied under the agreement, delivered before you run out
  • Meter readings collected for you, so billing is on actual pages
  • One number for service, toner and readings
  • A machine number on the DSA sticker that the customer portal recognises
  • Parts and labour covered under the agreement