← Back to the TASKalfa MZ6001ci pageDownload PDF
Document Services Australia
Spec sheet · page 1 of 2
13 September 2026
New Kyocera · A3 colour multifunction

KyoceraTASKalfa MZ6001ci

Supplied, installed and serviced by Document Services Australia, with toner included under the service agreement and one number for service, toner and meter readings.

60pages a minute, A4
30pages a minute, A3
7,150sheets maximum paper capacity

Specifications

Speed60 pages a minute A4 and 30 pages a minute A3, in colour and in black and white. Two sided printing and copying also run at 60 pages a minute A4.
Warm upAbout 17 seconds or less
Print resolution1,200 x 1,200 dpi, and 4,800 dpi equivalent x 1,200 dpi
Paper sizesUpper cassette A6R to A4R, lower cassette A6R to SRA3. Multi purpose tray A6R to SRA3 (320 x 450 mm), custom sizes 98 x 148 mm to 320 x 1,220 mm, and banner paper to 304.8 x 1,220 mm.
Paper weightsCassettes and multi purpose tray 52 to 300 gsm; banner paper 136 to 163 gsm
Paper capacityTwo 500 sheet universal cassettes and a 150 sheet multi purpose tray as standard; up to 7,150 sheets A4 with options
Two sided printingSRA3 to A6R, 60 to 256 gsm
Output500 sheets face down as standard, and up to 5,000 sheets with options
Document feederOptional. A 320 sheet single pass feeder that scans both sides at once.

Continued on page 2

1300 922 260documentservices.com.auinfo@documentservices.com.auABN 95 420 878 438

Specifications from Kyocera's Australian product page for the TASKalfa MZ6001ci (kyoceradocumentsolutions.com.au), checked 13 September 2026. Specifications change with each release and some items are options; we confirm the current model, its speed and its options with your quote. Important information is on page 2. This sheet is prepared by Document Services Australia and is not a Kyocera publication.

Scan for a priceOpens this model on our website
Document Services Australia
Spec sheet · page 2 of 2
13 September 2026

KyoceraTASKalfa MZ6001ci

Specifications, continued

ScanningUp to 274 images a minute at A4, 300 dpi, two sided, with the single pass feeder. Copy and scan resolution 600 x 600 dpi, with 200 x 100, 200 x 200, 200 x 400, 300 x 300 and 400 x 400 dpi also available, and 1,200 x 1,200 dpi through the TWAIN or WIA driver. Originals up to A3, and banners up to 1,900 mm with the optional feeder.
Memory and storageOptional hard drive, either 320 GB or 1 TB
Power990 W printing or copying, 45 W ready, 0.5 W in sleep mode
Size602 x 665 x 790 mm (width x depth x height)
WeightAbout 95 kg for the main unit

Before you choose, six questions

  1. How many pages a month, roughly?The single figure that sizes the machine. Too small and it wears out; too big and you pay for speed you never use.
  2. How much of it is colour?Colour pages cost more to run than black. If most of your printing is mono, the machine and the agreement should reflect that.
  3. Do you need A3?Plans, posters and some forms need it. Most offices do not, and an A4 machine is smaller and cheaper to run.
  4. How much scanning, and to where?Email, shared folders and cloud storage are all set up differently. Tell us where scans should land and we configure it on the day.
  5. Stapling, folding, booklets?Finishing is an option on most models, added at the quote. It is far cheaper to specify now than to add later.
  6. How many people share it?Decides trays, paper capacity and whether one machine is enough. We would rather tell you two smaller ones than sell you one big one.

What happens after you say yes

Delivery and setup

  • Delivered and installed by trained technicians, not dropped at the door
  • Placed, levelled and connected on site
  • Drivers installed on your computers
  • Scanning to email and folders tested with you
  • Your old machine taken away when you ask

Every month after

  • Toner supplied under the agreement, delivered before you run out
  • Meter readings collected for you, so billing is on actual pages
  • One number for service, toner and readings
  • A machine number on the DSA sticker that the customer portal recognises
  • Parts and labour covered under the agreement