← Back to the TASKalfa MZ6001i pageDownload PDF
Document Services Australia
Spec sheet · page 1 of 2
13 September 2026
New Kyocera · A3 black and white multifunction

KyoceraTASKalfa MZ6001i

Supplied, installed and serviced by Document Services Australia, with toner included under the service agreement and one number for service, toner and meter readings.

60pages a minute, A4
A3black and white
7,150sheets maximum paper capacity

Specifications

SpeedUp to 60 pages a minute A4, up to 30 pages a minute A3. Two sided printing and two sided copying both run at 60 pages a minute A4.
Warm upAbout 17 seconds or less
Print resolution1,200 x 1,200 dpi, and 4,800 dpi equivalent x 1,200 dpi
Paper sizesA6R to SRA3 (320 x 450 mm), custom sizes from 98 x 148 mm to 320 x 1,220 mm, and banner paper up to 304.8 x 1,220 mm
Paper weights52 to 300 gsm
Paper capacityTwo 500 sheet cassettes and a 150 sheet multi purpose tray as standard; up to 7,150 sheets A4 with options
Two sided printingStandard, SRA3 to A6R, 60 to 256 gsm
Output500 sheets face down as standard; up to 5,000 sheets with options
Document feederOptional. A 320 sheet single pass feeder that scans both sides at once.

Continued on page 2

1300 922 260documentservices.com.auinfo@documentservices.com.auABN 95 420 878 438

Specifications from Kyocera's Australian product page for the TASKalfa MZ6001i (kyoceradocumentsolutions.com.au), checked 13 September 2026. Specifications change with each release and some items are options; we confirm the current model, its speed and its options with your quote. Important information is on page 2. This sheet is prepared by Document Services Australia and is not a Kyocera publication.

Scan for a priceOpens this model on our website
Document Services Australia
Spec sheet · page 2 of 2
13 September 2026

KyoceraTASKalfa MZ6001i

Specifications, continued

ScanningUp to 274 images a minute, A4, 300 dpi, two sided, black and white and colour, with the single pass feeder. Scan resolutions 200 x 100, 200 x 200, 200 x 400, 300 x 300, 400 x 400 and 600 x 600 dpi, and 1,200 x 1,200 dpi through the TWAIN and WIA drivers.
Memory and storageOptional 320 GB or 1 TB hard disk
ConnectionsOptional wireless network interface at 5 GHz or 2.4 GHz, a wireless LAN card 802.11a/b/g/n/ac at 5 GHz or 2.4 GHz, and a wireless LAN card 802.11b/g/n at 2.4 GHz
PowerPrinting and copying 770 W, ready mode 40 W, sleep mode 0.4 W
Size602 x 665 x 790 mm (width x depth x height)
WeightAbout 83 kg for the main unit

Before you choose, six questions

  1. How many pages a month, roughly?The single figure that sizes the machine. Too small and it wears out; too big and you pay for speed you never use.
  2. How much of it is colour?Colour pages cost more to run than black. If most of your printing is mono, the machine and the agreement should reflect that.
  3. Do you need A3?Plans, posters and some forms need it. Most offices do not, and an A4 machine is smaller and cheaper to run.
  4. How much scanning, and to where?Email, shared folders and cloud storage are all set up differently. Tell us where scans should land and we configure it on the day.
  5. Stapling, folding, booklets?Finishing is an option on most models, added at the quote. It is far cheaper to specify now than to add later.
  6. How many people share it?Decides trays, paper capacity and whether one machine is enough. We would rather tell you two smaller ones than sell you one big one.

What happens after you say yes

Delivery and setup

  • Delivered and installed by trained technicians, not dropped at the door
  • Placed, levelled and connected on site
  • Drivers installed on your computers
  • Scanning to email and folders tested with you
  • Your old machine taken away when you ask

Every month after

  • Toner supplied under the agreement, delivered before you run out
  • Meter readings collected for you, so billing is on actual pages
  • One number for service, toner and readings
  • A machine number on the DSA sticker that the customer portal recognises
  • Parts and labour covered under the agreement