← Back to the TASKalfa MZ7500i pageDownload PDF
Document Services Australia
Spec sheet · page 1 of 2
13 September 2026
New Kyocera · A3 black and white multifunction

KyoceraTASKalfa MZ7500i

Supplied, installed and serviced by Document Services Australia, with toner included under the service agreement and one number for service, toner and meter readings.

75pages a minute, A4
A3black and white
500sheet single pass feeder as standard

Specifications

SpeedUp to 75 pages a minute A4 and 37 pages a minute A3, printing and copying
Warm upAbout 30 seconds or less
Print resolutionUp to 1,200 x 1,200 dpi, and 4,800 x 1,200 dpi equivalent in multi value mode
Paper sizesUpper cassette A6R to SRA3. Lower cassette A6R to 330.2 x 487.7 mm. High capacity deck up to A4. Multi purpose tray A6R to 330.2 x 487.7 mm. Banner paper up to 330.2 x 1,220 mm.
Paper weightsCassettes 52 to 300 gsm, high capacity deck 60 to 256 gsm, multi purpose tray 52 to 300 gsm
Paper capacityTwo 550 sheet cassettes, two 1,500 sheet high capacity decks and a 250 sheet multi purpose tray as standard; up to 7,850 sheets with options
Two sided printingStandard, 52 to 256 gsm from A5R to A4, and 60 to 256 gsm from A3 to SRA3
OutputOptional Copy Tray (D) holds 100 sheets in the upper tray and 250 sheets in the lower tray. Optional finishers hold 4,000 sheets in tray A, 200 in tray B and 50 in tray C.
Document feederStandard 500 sheet dual scan document processor, a single pass feeder that scans both sides at once, 35 to 220 gsm

Continued on page 2

1300 922 260documentservices.com.auinfo@documentservices.com.auABN 95 420 878 438

Specifications from Kyocera's Australian product page for the TASKalfa MZ7500i (kyoceradocumentsolutions.com.au), checked 13 September 2026. Specifications change with each release and some items are options; we confirm the current model, its speed and its options with your quote. Important information is on page 2. This sheet is prepared by Document Services Australia and is not a Kyocera publication.

Scan for a priceOpens this model on our website
Document Services Australia
Spec sheet · page 2 of 2
13 September 2026

KyoceraTASKalfa MZ7500i

Specifications, continued

ScanningUp to 150 images a minute one sided and 300 images a minute two sided. Scan resolution 300 x 300 dpi by default, and up to 1,200 x 1,200 dpi.
Memory and storageOptional 1 TB hard drive
ConnectionsOptional Gigabit network interface, and wireless LAN 802.11a/b/g/n/ac at 5 GHz or 2.4 GHz with WiFi direct
PowerPrinting and copying 1,300 W, ready mode 130 W, sleep mode 0.5 W, off mode 0.1 W
Size685 x 660 x 1,227 mm (width x depth x height)
WeightAbout 152 kg

Before you choose, six questions

  1. How many pages a month, roughly?The single figure that sizes the machine. Too small and it wears out; too big and you pay for speed you never use.
  2. How much of it is colour?Colour pages cost more to run than black. If most of your printing is mono, the machine and the agreement should reflect that.
  3. Do you need A3?Plans, posters and some forms need it. Most offices do not, and an A4 machine is smaller and cheaper to run.
  4. How much scanning, and to where?Email, shared folders and cloud storage are all set up differently. Tell us where scans should land and we configure it on the day.
  5. Stapling, folding, booklets?Finishing is an option on most models, added at the quote. It is far cheaper to specify now than to add later.
  6. How many people share it?Decides trays, paper capacity and whether one machine is enough. We would rather tell you two smaller ones than sell you one big one.

What happens after you say yes

Delivery and setup

  • Delivered and installed by trained technicians, not dropped at the door
  • Placed, levelled and connected on site
  • Drivers installed on your computers
  • Scanning to email and folders tested with you
  • Your old machine taken away when you ask

Every month after

  • Toner supplied under the agreement, delivered before you run out
  • Meter readings collected for you, so billing is on actual pages
  • One number for service, toner and readings
  • A machine number on the DSA sticker that the customer portal recognises
  • Parts and labour covered under the agreement