Book a technician OKI C9650 error codes Price a newer machine
OKI C9650 error codes
Every service code group for the OKI C9650 and C9850, from the service manual, in plain words: what it means, and who clears it. Of the 16 groups below, 4 may clear with a restart, 1 you can clear yourself and 11 need a technician. Quote the full code when you book, and a technician arrives knowing what to bring.
The same codes sit with every other OKI model in our OKI error code guide.
These are the codes in the maintenance manual for the OKI C9650 and C9850 that the OKI error code guide does not already explain under another model.
C9650: controller and option codes
Service calls from the controller board, the panel and the options, from the maintenance manual.
| Code | What it means | Who clears it |
|---|---|---|
| 020 to 048 | The controller board's memory: a ROM check failed (020; 025 on Japanese models), a RAM module in slot 1 or 2 failed its check or is not a supported type (031, 032, 036, 037), the board's flash memory failed (041), or a PostScript ROM is fitted to a PCL only model (048). A technician is needed. Codes in this group: 020, 025, 031, 032, 036, 037, 041, 048. | A technician |
| 050, 051, 060, 062, 063 | The operator panel, the controller board's cooling fan, the parallel or USB interface, or the link to the network board failed. Switch off and on; if it comes back, a technician is needed. | A restart may clear it |
| 096, 097 | The finisher reported an error it cannot recover from, or the inverter's power supply failed. Switch off and on; if it comes back, a technician is needed. | A restart may clear it |
| 115, 116, 117 | An option made for another model is fitted: the 5th tray (115), the finisher (116) or the inverter (117). Fit the right option for this printer. | A technician |
| 125, 179 | The multipurpose tray did not find its home position (125), or the fuser fitted is the wrong model or voltage (179). A technician is needed. | A technician |
| 180, 185, 186 | The engine cannot talk to an option: the envelope feeder (180), the 5th tray (185) or the finisher (186). Switch off and on and check the option is fitted properly; if it comes back, a technician is needed. | A restart may clear it |
| 187, 188, 189 | Communication with the control panel, the sub CPU board or the inverter unit failed. Check the cables; if it comes back, a technician is needed. | A technician |
| 200, 201, 202 | An engine firmware download failed. Switch off and on and run the download again. | A restart may clear it |
| 220 | The hard disk was removed or replaced after print statistics were turned on, so the statistics no longer match. A technician is needed. | A technician |
| 240 to 248 | Engine program memory: the flash memory in the engine (240), the duplex unit (241), optional trays 2 to 5 (242 to 245), the sub CPU (247) or the inverter (248) failed. Switch off and on; if it comes back, the board needs a technician. Codes in this group: 240, 241, 242, 243, 244, 245, 247, 248. | A technician |
C9650: engine codes
Power off and on codes from the print engine.
| Code | What it means | Who clears it |
|---|---|---|
| 910 to 914 | A tray's gear drive (GDDC) error, trays 1 to 4. Check the tray is fitted properly; if it stays, a technician replaces the tray's drive. Codes in this group: 910, 911, 912, 913, 914. | A technician |
| 917 | The transfer belt is not running properly (belt slit sensor). Check the belt unit is seated; if it stays, the belt unit needs replacing. | A technician |
| 919, 924 to 927 | 24 volt power is not reaching the duplex unit (919) or optional tray 2, 3, 4 or 5 (924 to 927). Check the unit is fitted properly; if it stays, a technician is needed. Codes in this group: 919, 924, 925, 926, 927. | A technician |
| 920, 921 | The yellow (920) or magenta (921) image drum locked. Check that image drum is seated properly; if it comes back, replace that image drum. | You can clear it |
| 929, 940 | The waste toner transfer motor locked (929), or the waste toner transfer for the image drums is not working (940). A technician is needed. | A technician |
| 930, 932, 936 | A board's CPU clock is wrong: the sub CPU (930), the inverter (932) or tray 5 (936). A technician checks the board connection or replaces the board. | A technician |
Book a technician for the OKI C9650
Five quick details. We call you back within 1 business hour, Monday to Friday 8am to 5pm (Queensland time), to confirm the attendance charge and a time.
Rather talk now? Call 1300 922 260. Several machines, or an address to add? Use the full booking form.
Repair it, or replace it?
If the OKI C9650 keeps showing the same codes, or a repair would cost more than the machine is worth, we can price a newer or refurbished one to buy outright, rent or lease, and look after it once it is in. Tell us what you need and we will come back with a price.
