Kyocera special until 28 February 2027. Copiers and printers at a special price.See the machinesGet a price
Home/Error codes/Zebra/Zebra ZT410
Zebra · industrial label printer

Zebra ZT410 error codes and service

What each code on the Zebra ZT410, ZT420 and ZT400 series means, which ones a restart or the person at the machine can clear, and which need a technician. Book one here and we call you back within 1 business hour.

Book a technician Zebra ZT410 error codes Price a newer machine

Zebra ZT410 error codes

Every service code group for the Zebra ZT410, ZT420 and ZT400 series, from the service manual, in plain words: what it means, and who clears it. Of the 10 groups below, 1 may clear with a restart, 5 you can clear yourself and 4 need a technician. Quote the full code when you book, and a technician arrives knowing what to bring.

The same codes sit with every other Zebra model in our Zebra error code guide.

The ZT400 series industrial label printers show a message on the screen with the lights. These come from Zebra's own guide for the series.

Messages on the ZT410

What the screen says, and who clears it.

CodeWhat it meansWho clears it
HEAD OPEN, CLOSE HEADThe printhead is not fully closed, or its sensor has failed.You can clear it
MEDIA OUT, LOAD MEDIALabels are out, loaded wrongly, or the media sensor is out of place.You can clear it
RIBBON OUTIn thermal transfer mode the ribbon is out, loaded wrongly, or not seen by its sensor.You can clear it
WARNING RIBBON INA ribbon is loaded but the printer is set for direct thermal labels.You can clear it
PH NOT AUTHENTICATEDThe printhead fitted is not a genuine Zebra printhead.A technician
PRINT HEAD OVERTEMPThe printhead is too hot. Printing resumes by itself when it cools.You can clear it
HEAD COLD, THERMISTOR, REPLACE PRINTHEADThe printhead is too cold, its cable is not connected properly, or its temperature sensor has failed.A technician
CUT ERRORThe cutter blade is stuck in the label path. Power off and check for debris.A technician
OUT OF MEMORYNot enough memory to store a graphic, format, bitmap or font.A restart may clear it
All lights on, nothing printingAn internal electronics or firmware failure.A technician

Book a technician for the Zebra ZT410

Five quick details. We call you back within 1 business hour, Monday to Friday 8am to 5pm (Queensland time), to confirm the attendance charge and a time.

Rather talk now? Call 1300 922 260. Several machines, or an address to add? Use the full booking form.

Repair it, or replace it?

If the Zebra ZT410 keeps showing the same codes, or a repair would cost more than the printer is worth, we can price a newer or refurbished one to buy outright, rent or lease, and look after it once it is in. Tell us what you need and we will come back with a price.

Ask for a price

More about Zebra service