Kyocera special until 28 February 2027. Copiers and printers at a special price.See the machinesGet a price
Home/Error codes/Samsung/Samsung CLX-8640
Samsung · A4 colour multifunction

Samsung CLX-8640 error codes and service

What each code on the Samsung CLX-8640 and CLX-8650 means, which ones a restart or the person at the machine can clear, and which need a technician. Book one here and we call you back within 1 business hour.

Book a technician Samsung CLX-8640 error codes Price a newer machine

Samsung CLX-8640 error codes

Every service code group for the Samsung CLX-8640 and CLX-8650, from the service manual, in plain words: what it means, and who clears it. Of the 41 groups below, 12 may clear with a restart, 17 you can clear yourself and 12 need a technician. Quote the full code when you book, and a technician arrives knowing what to bring.

The same codes sit with every other Samsung model in our Samsung error code guide.

These are the codes in the service manual for the Samsung CLX-8640ND and CLX-8650ND that the Samsung error code guide does not already explain under the MultiXpress models.

CLX-8640: motors, sensors and supplies

Codes from the error code list in the service manual. The second digit after the dash gives the colour: 2 yellow, 3 magenta, 4 cyan, 5 black.

CodeWhat it meansWho clears it
A1-1211 to A1-1613A motor is not running properly: the fuser motor (A1-121x), the pick up motor (A1-131x) or the transfer belt motor (A1-161x). Check nothing is caught around the fuser or the tray, then switch off and on; if it comes back, a technician is needed.
Codes in this group: A1-1211, A1-1212, A1-1213, A1-1311, A1-1312, A1-1313, A1-1611, A1-1612, A1-1613.
A restart may clear it
A1-2211 to A1-2513The drum (OPC) motor for yellow, magenta, cyan or black is not running properly. Switch off and on; if it comes back, a technician is needed.
Codes in this group: A1-2211, A1-2212, A1-2213, A1-2311, A1-2312, A1-2313, A1-2411, A1-2412, A1-2413, A1-2511, A1-2512, A1-2513.
A restart may clear it
A1-5211 to A1-5513Toner is not being supplied for yellow, magenta, cyan or black. Check the toner cartridge for that colour is seated, then switch off and on; if it comes back, a technician is needed.
Codes in this group: A1-5211, A1-5212, A1-5213, A1-5311, A1-5312, A1-5313, A1-5411, A1-5412, A1-5413, A1-5511, A1-5512, A1-5513.
A restart may clear it
A3-2110, A3-2210The toner density (CTD) sensor failed its check. It is usually dirty: a technician, or a careful user with a soft dry cloth, cleans it.A technician
A3-3111 to A3-3412A sensor failed: the fuser's non contact temperature sensor (A3-311x), the inner temperature sensor (A3-3210) or the outer temperature and humidity sensor (A3-3310 to A3-3412). Switch off and on; if it comes back, a technician is needed.
Codes in this group: A3-3111, A3-3112, A3-3113, A3-3114, A3-3210, A3-3310, A3-3410, A3-3411, A3-3412.
A technician
A4-1117, A4-1118The eraser lamp is not lighting. Open the front door and close it; if it comes back, a technician is needed.A restart may clear it
C1-2110 to C1-5124A toner cartridge is nearly empty (C1-x110, get a new one ready) or empty (C1-x120, C1-x124, replace it now).
Codes in this group: C1-2110, C1-2120, C1-2124, C1-3110, C1-3120, C1-3124, C1-4110, C1-4120, C1-4124, C1-5110, C1-5120, C1-5124.
You can clear it
C1-2410 to C1-5513A toner cartridge is not fitted (C1-x410), or it is not compatible with this machine (C1-x510, C1-x513). Fit a cartridge made for this model.
Codes in this group: C1-2410, C1-2510, C1-2513, C1-3410, C1-3510, C1-3513, C1-4410, C1-4510, C1-4513, C1-5410, C1-5510, C1-5513.
You can clear it
C1-2711 to C1-5712The chip (CRUM) on a toner cartridge cannot be read. Take the cartridge out and refit it; if it stays, try another cartridge, then call a technician.
Codes in this group: C1-2711, C1-2712, C1-3711, C1-3712, C1-4711, C1-4712, C1-5711, C1-5712.
A technician
C3-2110 to C3-5120A drum (imaging) unit is nearly at the end of its life (C3-x110, get one ready) or at the end of its life (C3-x120, replace it).
Codes in this group: C3-2110, C3-2120, C3-3110, C3-3120, C3-4110, C3-4120, C3-5110, C3-5120.
You can clear it
C3-2410 to C3-5510A drum unit is not fitted (C3-x410), its charger cannot be read (C3-x414, refit it), or it is not compatible (C3-x510). Fit or refit a drum unit made for this model.
Codes in this group: C3-2410, C3-2414, C3-2510, C3-3410, C3-3414, C3-3510, C3-4410, C3-4414, C3-4510, C3-5410, C3-5414, C3-5510.
You can clear it
C3-2711 to C3-5712The chip (CRUM) on a drum unit cannot be read. Refit the drum unit; if it stays, a technician is needed.
Codes in this group: C3-2711, C3-2712, C3-3711, C3-3712, C3-4711, C3-4712, C3-5711, C3-5712.
A technician
C7-1130, C7-1310The waste toner container is full (C7-1130), so replace it, or it is not fitted (C7-1310), so fit it.You can clear it
C8-2110 to C8-5125A developer unit is nearly at, or at, the end of its life. A technician replaces it.
Codes in this group: C8-2110, C8-2125, C8-3110, C8-3125, C8-4110, C8-4125, C8-5110, C8-5125.
A technician
C8-2210 to C8-5313A developer unit has a toner supply or sensor calibration problem. Switch off and on; if it comes back, a technician is needed.
Codes in this group: C8-2210, C8-2310, C8-2313, C8-3210, C8-3310, C8-3313, C8-4210, C8-4310, C8-4313, C8-5210, C8-5310, C8-5313.
A restart may clear it
C8-2410, C8-3410, C8-4410, C8-5410A developer unit is not fitted. A technician fits it.A technician
C9-1132, C9-1142The pick up rollers for tray 3 (C9-1132) or tray 4 (C9-1142) have reached the end of their life. A technician replaces them at the next service.A technician
C9-2110, C9-2120, C9-2220The second transfer roller is near or at the end of its life (C9-2110, C9-2120), or it is not seated properly (C9-2220, refit it).A technician

CLX-8640: paper, finisher and system codes

Paper jams, the optional trays, the finisher, and the system, power, fuser, laser and document feeder codes.

CodeWhat it meansWho clears it
H1-1211 to H1-1418Paper jam in tray 2 (H1-12xx), tray 3 (H1-13xx) or tray 4 (H1-14xx), at the pick up roller or before the feed sensor. Open the tray and clear the paper.
Codes in this group: H1-1211, H1-1213, H1-1217, H1-1218, H1-1311, H1-1317, H1-1318, H1-1411, H1-1417, H1-1418.
You can clear it
H1-1230, H1-1236, H1-1237The machine cannot talk to an optional tray. Check the tray is seated on its connector, then switch off and on; if it comes back, a technician is needed.A restart may clear it
H1-1253, H1-1353, H1-1453Paper is not feeding from tray 2, 3 or 4. Pull the tray out, check the paper and push it back in.You can clear it
H2-5001 to H2-5102A finisher mechanism is not working: the paddle, the front or rear jogger, the extension tray, the ejector, the stapler clinch motor or the stacker. Check the finisher and switch off and on; if it comes back, a technician is needed.
Codes in this group: H2-5001, H2-5002, H2-5003, H2-5004, H2-5005, H2-5006, H2-5007, H2-5008, H2-5009, H2-5010, H2-5011, H2-5012, H2-5013, H2-5014, H2-5015, H2-5096, H2-5097, H2-5098, H2-5099, H2-5100, H2-5101, H2-5102.
A restart may clear it
H2-5032 to H2-5037Paper jam in the finisher, at its entry, inside it or at its exit. Open the finisher and clear the paper.
Codes in this group: H2-5032, H2-5033, H2-5034, H2-5035, H2-5036, H2-5037.
You can clear it
H2-5048, H2-5A21A finisher door is open: the front door (H2-5048) or the top door (H2-5A21). Close it.You can clear it
H2-5064 to H2-5A50The machine cannot talk to the finisher. Check the finisher is docked and its cable is in, then switch off and on; if it comes back, a technician is needed.
Codes in this group: H2-5064, H2-5065, H2-5066, H2-5067, H2-5068, H2-5069, H2-5070, H2-5071, H2-5A50.
A restart may clear it
H2-5A31, H2-5A32, H2-5A34, H2-5A35The finisher's stacker or bin 2 is nearly full or full. Remove the printed paper.You can clear it
H2-5A62, H2-5A63The staple cartridge is low (H2-5A62) or empty or missing (H2-5A63). Replace it.You can clear it
H2-5A90Paper jam at the top of the finisher. Clear the paper there.You can clear it
M1-1113 to M3-1114Paper jam in tray 1 (M1), in the duplex path or at the registration sensor (M2), or around the fuser (M3). Open the covers the panel shows and clear the paper.
Codes in this group: M1-1113, M1-1114, M2-2113, M2-2114, M2-2215, M2-2216, M2-2313, M2-2414, M3-1113, M3-1114.
You can clear it
S1-2411The hard disk is missing or has failed. A technician is needed.A technician
S1-2433 to S1-2449The system memory is corrupted or there was an unexpected software error. Switch off and on; if it comes back, a technician is needed.
Codes in this group: S1-2433, S1-2443, S1-2444, S1-2445, S1-2446, S1-2447, S1-2448, S1-2449.
A restart may clear it
S1-2434, S1-2436, S1-2438, S1-2439The hard disk partition or memory is full. Delete stored jobs and documents you no longer need; if it stays, a technician is needed.You can clear it
S1-2511 to S1-2540The MSOK chip on the main board has a problem, or the speed (PPM) data is wrong. A technician is needed.
Codes in this group: S1-2511, S1-2521, S1-2523, S1-2530, S1-2540.
A technician
S2-1211, S3-3121, S3-3211, S5-3111Communication failed between the main board's ASIC and its microcontroller (S2-1211), with the document feeder board (S3-3211) or with the control panel (S5-3111), or the scanner module does not move (S3-3121). Switch off and on; if it comes back, a technician is needed.A restart may clear it
S2-331CCalibrating, please wait. This is not a fault: the machine is adjusting its colour. Wait for it to finish.You can clear it
S2-4410The side cover is open. Close it.You can clear it
S2-5112 to S2-5250Automatic colour registration (S2-51xx) or the drum feed forward control (S2-52xx) failed. Switch off and on; if it comes back, a technician is needed.
Codes in this group: S2-5112, S2-5120, S2-5131, S2-5132, S2-5133, S2-5135, S2-5136, S2-5161, S2-5164, S2-5210, S2-5220, S2-5231, S2-5232, S2-5233, S2-5234, S2-5240, S2-5250.
A restart may clear it
S7-1110, S7-1210, S8-1111, S8-1112Power is not reaching a board properly: 24 volt (S7-1110) or 5 volt (S7-1210) to the main board, or 24 volt to high voltage board 1 or 2 (S8-1111, S8-1112). A technician is needed.A technician
U1-2113 to U1-233FThe fuser's temperature is not right: its control is abnormal, it changed too fast, or it is too low (U1-233x). Switch off and on once; if it comes back, a technician is needed.
Codes in this group: U1-2113, U1-2119, U1-2135, U1-2316, U1-2317, U1-2335, U1-2337, U1-2338, U1-2339, U1-233A, U1-233D, U1-233E, U1-233F.
A restart may clear it
U2-6121, U2-6123, U2-7110The laser unit (LSU): its motor is not running properly (U2-6121, U2-6123) or its temperature control is not right (U2-7110). A technician is needed.A technician
U3-3111 to U3-3714Paper jam in the document feeder, around its scan in and registration rollers. Open the feeder cover and clear the original.
Codes in this group: U3-3111, U3-3211, U3-3213, U3-3214, U3-3313, U3-3314, U3-3511, U3-3513, U3-3514, U3-3711, U3-3713, U3-3714.
You can clear it

Book a technician for the Samsung CLX-8640

Five quick details. We call you back within 1 business hour, Monday to Friday 8am to 5pm (Queensland time), to confirm the attendance charge and a time.

Rather talk now? Call 1300 922 260. Several machines, or an address to add? Use the full booking form.

Repair it, or replace it?

If the Samsung CLX-8640 keeps showing the same codes, or a repair would cost more than the machine is worth, we can price a newer or refurbished one to buy outright, rent or lease, and look after it once it is in. Tell us what you need and we will come back with a price.

Ask for a price

More about Samsung service