Book a technician Toshiba e-STUDIO 6520C error codes Price a newer machine
Toshiba e-STUDIO 6520C error codes
Every service code group for the Toshiba e-STUDIO 5520C, 6520C and 6530C, from the service manual, in plain words: what it means, and who clears it. Of the 72 groups below, 23 may clear with a restart, 7 you can clear yourself and 42 need a technician. Quote the full code when you book, and a technician arrives knowing what to bring.
The same codes sit with every other Toshiba model in our Toshiba error code guide.
First, the codes every Toshiba model in this range shares.
Booking, parts and a price for these machines: Toshiba e-STUDIO 2515AC.
E0xx to E5xx: paper jams in the machine
The drawers, the bypass tray, the PFP and LCF, and the path through the fuser to the exit and the duplexing unit.
| Code | What it means | Who clears it |
|---|---|---|
| E010, E020 | Paper coming out of the fuser did not reach the exit sensor, or stopped there. | A restart may clear it |
| E061 to E065 | The paper in a drawer or the bypass tray is not the size the machine is set for. Match the setting to the paper. Codes in this group: E061, E062, E063, E064, E065. | A restart may clear it |
| E120 | Paper from the bypass tray did not reach its feed sensor. | A restart may clear it |
| E130, E140 | Paper from the first or second drawer did not reach its feed sensor. Repeats usually mean worn pickup, feed or separation rollers. | A restart may clear it |
| E150, E160, E190 | A misfeed from the upper or lower PFP drawer, or from the large capacity feeder. | A restart may clear it |
| E200, E210, E300, E330 | Paper from a drawer or the PFP did not reach the registration sensor. | A restart may clear it |
| E410 to E490 | A cover was opened while paper was moving: the front cover, a side cover, the duplexing unit, the jam access cover, the bridge unit or the job separator. Codes in this group: E410, E420, E421, E422, E430, E440, E450, E480, E490. | A restart may clear it |
| E510, E520, E110 | A jam in the automatic duplexing unit (ADU), or paper from it not reaching the registration sensor. | A restart may clear it |
| E570, E580 | Paper did not reach, or stopped at, the reverse sensor while the sheet was being turned over. | A restart may clear it |
E7xx and E8xx: document feeder jams
The RADF, or the single pass DSDF, on top of the machine.
| Code | What it means | Who clears it |
|---|---|---|
| E712, E721 | The original did not reach the registration sensor or the read sensor in the feeder. | A restart may clear it |
| E718 | Originals were not set properly, or the DSDF original tray did not lift as it should. | A restart may clear it |
| E722, E731 | The original did not reach, or stopped at, the feeder's exit sensor. | A restart may clear it |
| E724, E725 | The original stopped at the registration sensor or the read sensor. | A restart may clear it |
| E762 to E777 | An original was left behind in the DSDF, found by one of its sensors. Codes in this group: E762, E769, E770, E771, E774, E775, E777. | A restart may clear it |
| E860, E870 | The feeder or its jam access cover was opened while it was feeding. If E860 shows with every cover shut, it needs a technician. | A restart may clear it |
E9xx and EAxx: finisher jams
The bridge unit, the finisher, the hole punch and the saddle stitch unit.
| Code | What it means | Who clears it |
|---|---|---|
| E910 to E940 | Paper did not reach, or stopped in, the bridge unit between the machine and the finisher. Codes in this group: E910, E920, E930, E940. | A restart may clear it |
| EA10, EA20 | Paper was late into the finisher, or stopped in it. | A restart may clear it |
| EA50 | A staple jam in the finisher. Three in a row becomes a CB50 service call. | A restart may clear it |
C0xx and C1xx: drive and paper feeding
The drive to the developer units, and the drawer trays and feeders.
| Code | What it means | Who clears it |
|---|---|---|
| C020 | The developer drive motor is not turning properly. | A technician |
| C040 | The motor in the paper feed pedestal (PFP) is not turning properly. | A technician |
| C130, C140 | The first or second drawer tray did not lift: its tray up motor did not turn, or the tray did not move as it should. | A technician |
| C150, C160 | The same tray fault in the upper or lower PFP drawer. | A technician |
| C180, C1A0, C1B0 | A fault in the large capacity feeder (LCF): its tray up motor, end fence motor or transport motor. | A technician |
C2xx: scanning
The scanner and the reading of originals.
| Code | What it means | Who clears it |
|---|---|---|
| C260 | The scanner lamp was not seen lighting against its white reference at switch on. | A technician |
| C270, C280 | The scanner carriage did not leave, or did not return to, its home position in time. C270 can also follow firmware loaded for the wrong model. | A technician |
C3xx, C9xx and CDxx: copy process
The transfer belt, the developer units, the drums and chargers, and the toner that feeds them.
| Code | What it means | Who clears it |
|---|---|---|
| C370 | The transfer belt is not moving properly. | A technician |
| C380, C381 | The auto toner sensor in the black developer unit read above or below its limit. | A technician |
| C390 to C3B1 | The same auto toner sensor fault in the cyan, magenta or yellow developer unit. Codes in this group: C390, C391, C3A0, C3A1, C3B0, C3B1. | A technician |
| C970 | High voltage transformer fault, raised when leakage is detected from a main charger. | A technician |
| C911 to C914 | The machine cannot read the chip on the black, cyan, magenta or yellow toner cartridge. Check the cartridge is seated properly. Codes in this group: C911, C912, C913, C914. | A technician |
| CD40 | The waste toner box is full. A new box and a restart may clear it; if not, a technician resets its counter. | A technician |
C4xx: fuser unit
The fuser belt, pressure roller and IH coil that melt the toner onto the page, and the power supply behind them.
| Code | What it means | Who clears it |
|---|---|---|
| C440 | Fuser heating fault during printing: a thermistor fault, or the fuser not coming up to temperature in time. | A technician |
| C445, C446 | The fuser did not reach its ready temperature while warming up. A third C445 after two in a row is held as C446, even after a restart. | A technician |
| C447 | The fuser temperature read too low while ready or printing. | A technician |
| C449 | The fuser went over temperature. The machine turns its own power off and will not stay on until the fuser has cooled. | A technician |
| C471, C472 | The fuser's IH board did not start, or is not getting power. This can point to the mains supply at the site. | A technician |
| C473, C474 | The mains supply voltage was above or below its limit. | A technician |
| C4E0, C4E1 | The pressure roller did not release, or did not come into contact, as expected. | A technician |
| C4E2 | The fuser belt is not turning, or not turning properly. | A technician |
C5xx, C9xx and F codes: communication and circuits
Communication between the machine's boards, the document feeder and the controller.
| Code | What it means | Who clears it |
|---|---|---|
| C550 | Communication lost between the scanner and the document feeder. | A technician |
| C560 | Communication error between the engine CPU and the paper feed control board. Switch off at the main power switch and back on first. | A restart may clear it |
| C940 | Engine CPU error. Switch off at the main power switch and back on; repeats need a technician. | A restart may clear it |
| F070, F071, F074 | Communication error between the system CPU and the engine CPU. A restart at the main power switch is the first step. | A restart may clear it |
| F110, F111 | Communication error between the system CPU and the scanner CPU. | A restart may clear it |
| F410 | Power abnormality. Often the wall outlet: the machine should have an outlet to itself, with no extension lead. | A technician |
CAxx and CExx: laser and image control
The laser optical unit and the sensors that keep colour and density right.
| Code | What it means | Who clears it |
|---|---|---|
| CA00 | Colour registration fault: the colours could not be lined up. | A technician |
| CA10 | The polygon motor in the laser optical unit is not working properly. | A technician |
| CA20 to CA22 | The laser beam's line start signal was not detected. Codes in this group: CA20, CA21, CA22. | A technician |
| CE10 to CE41 | The image quality sensor, or the test pattern it reads, gave an abnormal result. Codes in this group: CE10, CE20, CE40, CE41. | A technician |
CBxx and CCxx: finisher
Finishers, the saddle stitch unit and the hole punch.
| Code | What it means | Who clears it |
|---|---|---|
| CB00 | Communication lost between the machine and the finisher. | A technician |
| CB50, CB51 | Stapler home position fault. CB50 also follows three staple jams in a row. | A technician |
| CC60, CC61 | Hole punch motor fault. | A technician |
F1xx to F6xx: hard drive, system and firmware
The controller's hard drive, its databases, and the firmware.
| Code | What it means | Who clears it |
|---|---|---|
| F101_0 to F101_14 | The hard drive was not detected, or part of it could not be mounted. | A technician |
| F102 to F105 | The hard drive did not become ready, timed out, or returned bad data. Codes in this group: F102, F103, F104, F105. | A technician |
| F107 | File system error. The fix formats the drive, which clears the logs, templates and waiting jobs. | A technician |
| F120 to F127 | A database on the drive is corrupted, such as user information, logs, the home screen or job history. A full rebuild can erase the address book, so it is backed up first where possible. Codes in this group: F120, F121, F122, F124, F125, F126, F127. | A technician |
| F510, F520 | The application or the operating system did not start. A restart may clear it. | A restart may clear it |
| F600 | A firmware update failed and the firmware needs reinstalling. | A technician |
Then the codes the Toshiba e-STUDIO 5520C, 6520C and 6530C adds to those.
These A3 colour models share most codes with the tables above and add these, from their own service manual.
e-STUDIO 6520C: jams and paper the series adds
Jams and paper settings in the 5520C to 6530C manual that the tables above do not have.
| Code | What it means | Who clears it |
|---|---|---|
| E071 to E076 | The paper type set for a drawer (1st to 4th), the optional LCF or the tandem LCF does not match the paper in it. Set the right media type for the drawer. Codes in this group: E071, E072, E073, E074, E075, E076. | You can clear it |
| E240, E290, E370, E380, E3F0 | Paper from the 2nd, 3rd or 4th drawer, the optional LCF or the tandem LCF did not reach its transport sensor. Open the drawer and the side cover and clear the paper. | You can clear it |
| E2B0 to E2B7 | Paper stopped at the registration sensor; the last digit is where it came from (1st to 4th drawer, bypass, LCF, duplexer, optional LCF). Open the right side cover and clear the paper. Codes in this group: E2B0, E2B1, E2B2, E2B3, E2B4, E2B5, E2B6, E2B7. | You can clear it |
| E4B0 to E980 | Exit jams: the bridge unit opened during printing, or paper did not reach, stopped at or was left at the upper or lower exit sensor or the exit and reverse sensor. Clear the paper from the exit area and close the bridge unit. Codes in this group: E4B0, E590, E5A0, E744, E745, E746, E970, E980. | You can clear it |
| E511, E540 | Duplex misfeeds: the paper did not reach the duplexer's transport or feed sensor. Open the duplexer and clear the paper. | You can clear it |
| E772, E773, E890 | Document feeder jams: an original left at the width sensor or the transport sensor, or the feeder timed out. Open the feeder cover and clear the originals. | You can clear it |
| A221 to A2A2 | Job notices: a print job was cancelled or the power went off during it, or a department or user code reached its page limit for black or colour. Raise the limit or use another code. Codes in this group: A221, A222, A290, A291, A292, A2A0, A2A1, A2A2. | You can clear it |
e-STUDIO 6520C: service calls the series adds
Service calls in the 5520C to 6530C manual that the tables above do not have.
| Code | What it means | Who clears it |
|---|---|---|
| C021, C022, C023, C024 | A developer motor or developer mixer motor (colour or black) locked. A technician is needed. | A technician |
| C360 to C3C0 | The charger needle electrode cleaner failed, an auto toner sensor (black, cyan, magenta or yellow) is not connected, or the process unit is not connected. A technician is needed. Codes in this group: C360, C382, C392, C3A2, C3B2, C3C0. | A technician |
| C461 to C4E3 | Fuser faults on the induction heated fuser: the pressure roller heater or thermistors read wrong, the induction heater's power, drive circuit or coil failed, or the fuser motor turned abnormally. A technician is needed. Codes in this group: C461, C462, C463, C464, C476, C481, C490, C4E3. | A technician |
| C880, C890, C8A0, C8B0, CA47 | Document feeder motors (feed, read, reverse or exit) signalled an error, or the SNS board is disconnected. A technician is needed. | A technician |
| CD60 to CD82 | Toner supply and waste toner: the sub hopper toner sensors or a sub hopper toner motor failed, a waste toner transport motor locked, or the waste toner path is full. A technician is needed. Codes in this group: CD60, CD61, CD62, CD63, CD64, CD80, CD81, CD82. | A technician |
| CE42, CEC0, CFA0, CFA1 | The image quality test pattern did not print properly (with the EFI printer board), the 2nd transfer roller did not move in or out, or the media sensor reading was wrong. A technician is needed. | A technician |
| F100, F106, F108 | The hard disk could not be formatted, or a partition on it is damaged. A technician is needed. | A technician |
Book a technician for the Toshiba e-STUDIO 6520C
Five quick details. We call you back within 1 business hour, Monday to Friday 8am to 5pm (Queensland time), to confirm the attendance charge and a time.
Rather talk now? Call 1300 922 260. Several machines, or an address to add? Use the full booking form.
Repair it, or replace it?
If the Toshiba e-STUDIO 6520C keeps showing the same codes, or a repair would cost more than the machine is worth, we can price a newer or refurbished one to buy outright, rent or lease, and look after it once it is in. Tell us what you need and we will come back with a price.
