Book a technician Xerox AltaLink C8170 error codes Price a newer machine
Xerox AltaLink C8170 error codes
Every service code group for the Xerox AltaLink C8130 to C8170, from the service manual, in plain words: what it means, and who clears it. Of the 23 groups below, 3 may clear with a restart, 7 you can clear yourself and 13 need a technician. Quote the full code when you book, and a technician arrives knowing what to bring.
The same codes sit with every other Xerox model in our Xerox error code guide.
The AltaLink C8100 range (C8130, C8135, C8145, C8155 and C8170) shows its faults with a 3 in front of the family number, so a jam in tray 2 reads 372 rather than 072. These come from the service manual for that range.
Jams, doors and trays on the AltaLink C8100
Most of these you can clear: open the door or tray the screen shows, remove the paper and close it firmly.
| Code | What it means | Who clears it |
|---|---|---|
| 371-100 to 375-135, 377-105 to 377-189, 377-901 to 377-912, 378-118 | Paper arrived late at a sensor or stopped on its way from a tray, the bypass tray or the high capacity feeder. Codes in this group: 371-100, 371-105, 371-210, 371-212, 372-100, 372-105, 372-107, 372-210, 372-212, 373-100, 373-105, 373-108, 373-210, 373-212, 374-100, 374-105, 374-107, 374-210, 374-212, 375-100, 375-135, 377-105, 377-110, 377-130, 377-188, 377-189, 377-901, 377-908, 377-912. | You can clear it |
| 305-121 to 305-197 | An original jammed in the document feeder, or originals of sizes that cannot be mixed were loaded. Codes in this group: 305-121, 305-122, 305-123, 305-124, 305-125, 305-126, 305-127, 305-128, 305-129, 305-141, 305-144, 305-146, 305-153, 305-160, 305-193, 305-194, 305-196, 305-197. | You can clear it |
| 376-300, 377-300 to 377-305, 324-919 | A front or left door, the transport path, or the face up tray is open. Close it firmly. Codes in this group: 377-300, 377-301, 377-305. | You can clear it |
| 393-912 | The black toner cartridge is empty. Fit a new one. | You can clear it |
| 389-510 | The paper in the tray does not match the size set for it. | You can clear it |
| 371-210 to 374-212, 375-212 | A tray did not lift, a tray size sensor failed, or the bypass feed roller did not move. Codes in this group: 371-210, 371-212, 372-100, 372-105, 372-107, 372-210, 372-212, 373-100, 373-105, 373-108, 373-210, 373-212, 374-100, 374-105, 374-107, 374-210, 374-212. | A technician |
Engine codes on the AltaLink C8100
The fuser, drums, transfer belt, fans and the boards that drive them.
| Code | What it means | Who clears it |
|---|---|---|
| 310-327 to 310-626, 358-324 to 358-338, 399-364 to 399-395 | The induction fuser has a temperature, motor, fan, memory chip, wear or paper wrap fault. Codes in this group: 310-327, 310-330, 310-341, 310-360, 310-361, 310-362, 310-363, 310-364, 310-367, 310-368, 310-369, 310-370, 310-371, 310-372, 310-373, 310-374, 310-375, 310-376, 310-378, 310-379, 310-380, 310-382, 310-398, 310-420, 310-421, 310-613, 310-616, 310-617, 310-618, 310-619, 310-620, 310-621, 310-622, 310-623, 310-625, 310-626, 358-324, 358-325, 358-326, 358-327, 358-328, 358-329, 358-330, 358-331, 358-332, 358-333, 358-334, 358-335, 358-337, 358-338, 399-364, 399-373, 399-395. | A technician |
| 341-310 to 341-391 | A logic fault on the engine boards, a firmware mismatch, or a blown fuse on the motor drive board. Codes in this group: 341-310, 341-316, 341-317, 341-344, 341-345, 341-346, 341-350, 341-352, 341-353, 341-354, 341-355, 341-356, 341-358, 341-368, 341-369, 341-371, 341-388, 341-391. | A technician |
| 342-324 to 342-642, 343-322 to 343-356, 042-053, 042-070 | A drum, developer or transfer belt motor, a fan, the filter or the humidity sensor has a fault. Codes in this group: 342-324, 342-342, 342-347, 342-385, 342-603, 342-641, 342-642, 343-322, 343-347, 343-348, 343-349, 343-351, 343-352, 343-354, 343-356. | A technician |
| 345-310 to 345-377, 360-361, 361-310 to 361-357 | The engine controller, the LED print heads or the video chip did not start or talk properly. Codes in this group: 345-310, 345-311, 345-359, 345-368, 345-369, 345-370, 345-371, 345-377, 361-310, 361-354. | A restart may clear it |
| 389-600 to 389-679, 392-649 to 392-678, 752-062 to 752-065 | Colour registration or image density checks could not read their test marks. Codes in this group: 389-600, 389-601, 389-603, 389-616, 389-617, 389-674, 389-675, 389-676, 389-677, 389-678, 389-679, 392-649, 392-650, 392-651, 392-657, 392-658, 392-659, 392-660, 392-665, 392-666, 392-667, 392-668, 392-670, 392-671, 392-672, 392-673, 392-675, 392-676, 392-677, 392-678, 752-062, 752-063, 752-064, 752-065. | A technician |
| 391-328 to 391-331, 391-916 to 391-929, 393-338 | A drum or toner cartridge is not seated, or its chip could not be read or does not match. Reseat it first. Codes in this group: 391-328, 391-329, 391-330, 391-331, 391-916, 391-921, 391-924, 391-925, 391-926, 391-927, 391-928, 391-929. | You can clear it |
| 391-913 | The black drum cartridge has reached the end of its life. Fit a new one. | You can clear it |
| 393-324 | The yellow, magenta and cyan developer motor has failed. | A technician |
| 394-318 to 394-422 | The transfer belt, its cleaner or the second transfer roller is near or at the end of its life, or a transfer roller is out of position. Codes in this group: 394-318, 394-417, 394-418, 394-419, 394-420, 394-421, 394-422. | A technician |
Controller, scanner and fax codes on the AltaLink C8100
Software, storage, the scanner, the document feeder and the fax.
| Code | What it means | Who clears it |
|---|---|---|
| 302-302 to 302-390, 303-307 to 303-915, 344-329 | A software, memory or internal communication fault on the controller, or the machine did not shut down properly. Codes in this group: 302-302, 302-306, 302-308, 302-312, 302-315, 302-316, 302-317, 302-320, 302-321, 302-390, 303-307, 303-315, 303-316, 303-317, 303-318, 303-319, 303-320, 303-324, 303-325, 303-326, 303-327, 303-329, 303-330, 303-331, 303-332, 303-333, 303-338, 303-346, 303-355, 303-390, 303-397, 303-401, 303-403, 303-405, 303-417, 303-450, 303-777, 303-778, 303-788, 303-790, 303-915. | A restart may clear it |
| 395-001 to 395-323 | A software upgrade failed, for the machine or one of its options. Codes in this group: 395-001, 395-002, 395-007, 395-008, 395-009, 395-011, 395-019, 395-038, 395-042, 395-140, 395-150, 395-152, 395-153, 395-168, 395-180, 395-203, 395-204, 395-216, 395-226, 395-255, 395-300, 395-301, 395-302, 395-303, 395-304, 395-305, 395-306, 395-307, 395-308, 395-309, 395-310, 395-311, 395-312, 395-315, 395-316, 395-317, 395-318, 395-319, 395-321, 395-322, 395-323. | A technician |
| 319-300 to 319-760 | The image disk or image memory had an error, ran out of space, or its setup changed. Codes in this group: 319-300, 319-301, 319-302, 319-303, 319-310, 319-340, 319-401, 319-402, 319-403, 319-420, 319-422, 319-424, 319-426, 319-750, 319-752, 319-754, 319-760. | A restart may clear it |
| 305-253 to 305-948 | The document feeder lost contact, its memory or firmware failed, or a sensor or cover is faulty. Codes in this group: 305-253, 305-275, 305-280, 305-281, 305-282, 305-283, 305-305, 305-309, 305-600, 305-905, 305-906, 305-907, 305-908, 305-909, 305-910, 305-911, 305-919, 305-921, 305-940, 305-941, 305-942, 305-945, 305-946, 305-947, 305-948. | A technician |
| 362-310 to 362-791, 366-396 to 366-791 | A scanner fault: cables, calibration, the image sensor on either side, or its programmable chip. Codes in this group: 362-310, 362-312, 362-357, 362-395, 362-397, 362-398, 362-399, 362-453, 362-457, 362-460, 362-463, 362-476, 362-486, 362-779, 362-780, 362-781, 362-782, 362-791, 366-396, 366-397, 366-451, 366-453, 366-457, 366-460, 366-463, 366-779, 366-780, 366-791. | A technician |
| 320-302 to 320-713, 322-320 to 322-721 | The fax card or a fax line has failed, its memory is full, or a fax or scan feature did not install or remove. Codes in this group: 320-302, 320-303, 320-305, 320-320, 320-322, 320-323, 320-324, 320-331, 320-332, 320-338, 320-339, 320-340, 320-341, 320-342, 320-345, 320-701, 320-710, 320-711, 320-713, 322-320, 322-322, 322-323, 322-324, 322-325, 322-326, 322-327, 322-328, 322-332, 322-335, 322-336, 322-337, 322-338, 322-339, 322-340, 322-370, 322-371, 322-372, 322-407, 322-417, 322-419, 322-421, 322-720, 322-721. | A technician |
| 347-211 to 347-320, 377-211, 377-312 to 377-320 | The finisher or a paper feeder lost contact, an output or feed tray is unusable, or a module does not match. Codes in this group: 347-211, 347-212, 347-213, 347-216, 347-310, 347-320, 377-312, 377-314, 377-320. | A technician |
| 740-012 to 740-015 | A stored setting is out of range. Codes in this group: 740-012, 740-013, 740-014, 740-015. | A technician |
Book a technician for the Xerox AltaLink C8170
Five quick details. We call you back within 1 business hour, Monday to Friday 8am to 5pm (Queensland time), to confirm the attendance charge and a time.
Rather talk now? Call 1300 922 260. Several machines, or an address to add? Use the full booking form.
Repair it, or replace it?
If the Xerox AltaLink C8170 keeps showing the same codes, or a repair would cost more than the machine is worth, we can price a newer or refurbished one to buy outright, rent or lease, and look after it once it is in. Tell us what you need and we will come back with a price.
