Kyocera special until 28 February 2027. Copiers and printers at a special price.See the machinesGet a price
Home/Error codes/Xerox/Xerox ColorQube 8570
Xerox · A4 colour solid ink printer

Xerox ColorQube 8570 error codes and service

What each code on the Xerox ColorQube 8570 and 8870 means, which ones a restart or the person at the machine can clear, and which need a technician. Book one here and we call you back within 1 business hour.

Book a technician Xerox ColorQube 8570 error codes Price a newer machine

Xerox ColorQube 8570 error codes

Every service code group for the Xerox ColorQube 8570 and 8870, from the service manual, in plain words: what it means, and who clears it. Of the 8 groups below, 2 may clear with a restart, 3 you can clear yourself and 3 need a technician. Quote the full code when you book, and a technician arrives knowing what to bring.

The same codes sit with every other Xerox model in our Xerox error code guide.

These are the fault codes in the service manual for the ColorQube 8570 and 8870 solid ink printers.

ColorQube 8570 and 8870: paper, trays, ink sticks and waste

Jams, trays, loading ink and the waste tray. Xerox writes these codes chain, comma, link.

CodeWhat it meansWho clears it
00,015 to 89,603Paper path jams and sensors: paper reached a sensor late or not at all (preheater exit, pre deskew, deskew, strip or exit), was too long or too short, sat too wide or narrow, or a door was opened. Clear the paper from the zone the screen shows.
Codes in this group: 00,015, 00,202, 01,510, 82,140, 82,142, 83,149, 83,151, 89,104, 89,105, 89,106, 89,107, 89,108, 89,109, 89,110, 89,111, 89,112, 89,113, 89,119, 89,120, 89,121, 89,122, 89,147, 89,148, 89,571, 89,572, 89,600, 89,601, 89,602, 89,603.
You can clear it
71,120 to 75,952Tray faults: the tray guides moved during printing, a tray failed to raise, was pulled out while feeding, its pick flag timed out, or its motor stalled. Reseat the tray; if it repeats, a technician is needed.
Codes in this group: 71,120, 72,215, 72,217, 72,300, 73,300, 73,910, 73,952, 74,101, 74,300, 74,910, 74,952, 75,101, 75,300, 75,910, 75,952.
A restart may clear it
93,500; 93,505; 93,510; 93,515Out of ink: black, magenta, cyan or yellow. Load new ink sticks of that colour.
Codes in this group: 93,500, 93,505, 93,510, 93,515.
You can clear it
91,591 to 94,007Ink loading and waste: the ink load door is open, the ink sticks are the wrong type or not recognised, a stick is stuck or blocked in the loader, the factory ink allowance is used up, or the waste tray is full. Close the door, load genuine sticks, clear the loader or empty the waste tray.
Codes in this group: 91,591, 93,876, 93,965, 93,969, 93,985, 94,003, 94,007.
You can clear it

ColorQube 8570 and 8870: printhead, drum, ink system and electronics

Mechanical, thermal and electronic faults. Switch off and on first; most then need a technician.

CodeWhat it meansWho clears it
10,540 to 94,704Printhead and drum: transfix or imaging timing, the X or Y axis, printhead calibration, tilt or parking, the wiper, the process drive, the jetstacks or reservoir, the drum or preheater temperature, or drum maintenance. Switch off and on; if it comes back, a technician is needed.
Codes in this group: 10,540, 10,550, 88,504, 91,500, 91,501, 91,502, 91,503, 91,610, 91,716, 91,720, 91,721, 91,722, 91,723, 91,724, 91,725, 91,726, 91,727, 91,862, 91,866, 91,870, 94,513, 94,514, 94,516, 94,518, 94,526, 94,541, 94,550, 94,558, 94,570, 94,626, 94,700, 94,702, 94,703, 94,704.
A restart may clear it
93,516 to 93,997The ink system: the ink loader failed electrically or its melters ran too hot or cold, the printhead ink level sensing failed, or the printhead memory failed. A technician is needed.
Codes in this group: 93,516, 93,532, 93,533, 93,534, 93,584, 93,603, 93,609, 93,610, 93,611, 93,800, 93,896, 93,901, 93,997.
A technician
92,553 to 92,900Electronics: the electronics module, the wave amplifier, the power supply, the electronics fan, the configuration card, a software fault, or the ink loader or I/O board disconnected. A technician is needed.
Codes in this group: 92,553, 92,558, 92,571, 92,579, 92,587, 92,596, 92,601, 92,602, 92,606, 92,609, 92,813, 92,900.
A technician
99,001 to 99,071Power on self test faults: a part is disconnected (jetstack, reservoir, drum or preheat heater, ink melters, a fan, clutch, solenoid or motor), or the power supply or wave amplifier failed its check. A technician is needed.
Codes in this group: 99,001, 99,003, 99,005, 99,006, 99,008, 99,013, 99,015, 99,016, 99,017, 99,018, 99,019, 99,021, 99,022, 99,023, 99,024, 99,034, 99,036, 99,038, 99,051, 99,060, 99,061, 99,069, 99,070, 99,071.
A technician

Book a technician for the Xerox ColorQube 8570

Five quick details. We call you back within 1 business hour, Monday to Friday 8am to 5pm (Queensland time), to confirm the attendance charge and a time.

Rather talk now? Call 1300 922 260. Several machines, or an address to add? Use the full booking form.

Repair it, or replace it?

If the Xerox ColorQube 8570 keeps showing the same codes, or a repair would cost more than the machine is worth, we can price a newer or refurbished one to buy outright, rent or lease, and look after it once it is in. Tell us what you need and we will come back with a price.

Ask for a price

More about Xerox service